 |
Your lock-out tag shouldn't be a wallflower! Use solid background or stripes to
get attention. Many prefer the ANSI tag designs which show the signal alert header. |
 |
Use direct instructions. With a bold symbol and a "DO NOT OPERATE" message, you
remove any ambiguity from your message. A symbol provides the fastest way to reinforce
your message and broaden your audience. |
 |
Larger tags get attention. They are easier to fill out and to read. Follow ANSI
guidelines by using proper language:. instead of printing 'Signed By', use 'Name'.
Use the tag line "This Lock/Tag may only be removed by:" for more accurate records.
The word 'tag' or 'lock' can be circled or crossed out. This helps reinforce the
strict language of §1910.147. |
|
 |
 |
Printing instructions on the back of the tag ensures proper use. Always make sure
that these instructions correspond with the message on the front. |
 |
See OSHA §1910.147 Lock-Out/ Tag-Out, §1910.269 for the electrical industry and
§1910.268 for Telecommunications. Any effective LOTO program is built on employee
buy-in, lock-out devices and training. Overcome apathy with relevant case histories
changing support materials. See LOTO: Beyond the Written Procedure. |
 |
Tags should never tear off easily or embrittle with age. The tag fastener needs
to have “a minimum unlocking strength of no less than 50 pounds” so that your heavy-duty
tag isn't compromised [1910.147(c)(5)(ii)(C)(1)]. Use a sturdy nylon or wire tie
to secure your tag on your equipment. |
|
)
)
)
)
)
)
